Subscribe:Posts Comments

You Are Here: Home » Design Projects, Mechanical Presentation Topics, Mechanical Projects, Mechanical Seminar Topics, Mechatronics Projects, Mechatronics Seminar Topics, Non Conventional Energy, Paper Presentation Topics, Project Abstracts, Project Presentation Topics, Renewable energy » Mechanical Seminar Topics Paper Presentation On Seaswarm

Mechanical Seminar Topics -SEA SWARM

Seaswarm is pretty similar to Ocean Therapy Solutions’ device which filters crude oil from sea water, because it is designed to specifically siphon crude oil from sea water at a spill site. Ocean Therapy Solutions’ largest device could siphon up to 200 gallons a minute, but Seaswarm claim that as a collective group, their machines can work together to clean even larger areas of ocean.

Design of a Seaswarm

Assaf Biderman superviss this Mechanical seminar topics project at MIT. He is also the associate director of MIT’s Senseable City Lab. According to him the $20,000 robots will be put on exhibition in Venice, Italy. The Seaswarm robots give the appearance of a conveyor belt of a treadmill. The conveyer belt contains material which the MIT guys call a paper towel for oil spills. It can absorb up to 20 times its weight in oil. This belt floats on the sea surface and connected to an ice cooler.When it turns the belt pushes the robots frontward and absorbs the oil with the aid of a nanomaterial. This nanomaterial is designed to attract oil and repel water. Biderman explains it as a carpet rolling on the surface of the water.

Mechanical Seminar Topics

Mechanical Seminar Topics -seaswarm

How Seaswarm Works??

After soaking up the oil on the sea surface the robot can burn it on the spot or it can leave the oil in a bag which can be collected later. The heater is located on the “ice cooler” part of the body. The oil stored in the bag can be reused. According to Biderman, robots are good team players. They coordinate with one another with the help of GPS location data. They devise a strategy to clean up the mess in an effective way.

Damage can be confined to a smaller area: Biderman shares his opinion, “Ideally, when spillage happens, the best thing to do is to contain it right where the spillage occurs. But quite often the oil goes out of containment, and this is where this technology would be most effective.”

Cleaning oil spills can be costly business. If eco-friendly robots can take over and clean all the mess it will be good for marine life and humans too. MIT is developing Seaswarm robots that will utilize a special substance to absorb and collect oil from the sea surface. If everything turns out well, these robots can be used commercially in a year. These robots work best collectively. They can detect the oil spills on their own and then convey the message to their robotic group and chalk out a strategy among themselves to clean the mess.

Mechanical Seminar Topics

Mechanical Projects - seaswarm

The machines are around five metres long and two metres wide, and resemble something similar in appearance to a treadmill. Costing $20,000, each machine requires no human intervention and can work independently, and according to Seaswarm can locate a spill and transmit its location to other machines using WiFi and GPS. Collectively the machines will work through polluted ocean, and collect all the oil.

The machines are able to do this by soaking up oil with the tread as it skims over the surface, which uses nanotechnology which attracts oil and repels water. Once the tread has collected its fill – around 20 times its own weight in oil – it will deposit the oil collected in the ocean in a bag which can be collected and reused.

The robots are friendly to the environment too; they only require 100 watts of power, the equivalent of a bright light bulb. They also work autonomously and don’t need to return to the shore for constant maintenance.

Assaf Biderman, who supervised this Mechanical seminar topics project at MIT says, “Because it (conveyor belt) adheres to the surface of the water, it cannot capsize. So it can withstand quite severe weather. Imagine this like a leaf that lands on the surface of the water and moves with the waves and the currents and cannot be flipped over.”The team at MIT have calculated that if the Seaswarm robots were deployed during the current Gulf of Mexico oil spill, the costs of collecting the surface oil would have been significantly reduced. Biderman claimed that 10,000 Seaswarm robots could have cleaned up the oil in two months and the cost of the whole operation would have amounted to $100 million to $200 million.

“Ideally, when spillage happens, the best thing to do is to contain it right where the spillage occurs. But quite often the oil goes out of containment, and this is where this technology would be most effective,” he said.

Advantages of Seaswarm

Cost effective: If the Seaswarm robots are being deployed at the oil spill site they prove to be relatively cheap, quick and effective at cleaning up oil spills. Otherwise cleaning oil spills is quite costly as it need big ships and trained crews in large numbers. Biderman is of the opinion that if the Seaswarm robots would have been used at the Deepwater Horizon oil disaster, the robots would have cleaned up the oil in two months. The cost of the whole operation would have amounted to $100 million to $200 million. If we care to look at the statistics about 800 skimming boats were in service to clean up the Deepwater Horizon oil disaster. It would have needed only 5,000 to 10,000 of MIT’s autonomous robots to complete the same task.

Eco Friendly

The Seaswarm robots use clean and green solar energy. They need only 100 watts of power, or about that of a bright light bulb for their operations. You can utilize them on sea for months and they won’t ask for overtime for working incessantly.

Stability: Biderman says, “Because it (conveyor belt) adheres to the surface of the water, it cannot capsize,” he said, “So it can withstand quite severe weather. Imagine this like a leaf that lands on the surface of the water and moves with the waves and the currents and cannot be flipped over.” The robots can work under extreme conditions and rough weather. Biderman said MIT’s oil-sopping robot would be most effective in situations like the recent oil disaster, where oil is spread out.

Related Searches on Mechanical seminar topics

  • Mechanical Seminar Topics PPT
  • Mechanical Seminar Topics 2010
  • Technical Presentation Topics
  • Paper Presentation Topics
  • Mechanical Seminar topics list
  • Mechanical Seminar Topics Report
  • Mechanical Seminar Topics doc pdf
  • Mechanical Seminar Topics Abstracts

Download Full Mechanical Seminar Topics Paper Presentation On SEASWARM

Spiderwebs Technologies

SpiderWebs Technologies is a web based advertisements and Online business Promoting company, which interconnects 100’s of web admins and websites having 1000 daily unique visitors.

email
Related Posts Plugin for WordPress, Blogger...

1 Comment

Leave a Reply

© 2012 Latest Seminar Topics | Mechanical Mini Projects | Electronics Presentation | Engineering Presentations for Download · Subscribe:PostsComments · Designed by Theme Junkie · Powered by WordPress